Facilities

WEMCO is now operating exclusively out of its new Facility

Corporate Office & Manufacturing Headquarters: 5510 W Thorpe Rd. Spokane, WA 99224

 

69,000 sq ft Manufacturing facility - main office, cnc machine works, fabrication, assembly
2ea 100ton cranes (33'4" under girders) as well as several smaller cranes all in a clear span configuration of 92'
20ton gantry crane over the assembly area (21'7" under girders)
5ton single leg gantry over the machine shop high efficiency cnc machining centers
3500 sq ft Corporate Office

  19,000 sq ft Isolated Assembly Facility and Paint Facility
2ea 15ton cranes, 1ea 7.5ton crane and 1ea 5ton crane (33'4" under girder)
  Future expansion plans: 20,000 sq ft additional fabrication and assembly facility


Ingersoll 3.15M Masterhead CNC Planer Mill

WEMCO has fully commissioned an Ingersoll 3.15M Masterhead CNC Planer Mill. With its 5 sided machining capability this machine will be the largest vertical CNC mill in the Northwest with travels of:

X- Axis = 450”
Y- Axis = 159.5
Z- Axis Cross slide = 107”
W- Axis Ram = 31.5”
2 each right angle head attachments that can be indexed 4 X 90 degrees

ingersollPlaner_1    

Union CNC Horizontal Boring Mill

WEMCO has also added a Union CNC Horizontal Boring Mill which has been FANUC retrofitted.

Spindle Diameter 5.12” (FANUC controlled)
Y axis Travel 75.52”
X Axis Travel 109.64”
Z Axis Travel 91.38” Full Rotary Table
Spindle W Travel 35.43”
Spindle speed 5-1000 RPM Inf. Variable 67 HP
Cat 50 spindle

ingersollPlaner_1

 

New Location

Current Location
WEMCO Incorporated
5510 W Thorpe Rd
Spokane, WA 99224